Re-insert the pulley wheel and secure it with the nut and bolt ensuring the winch cable is on the inside of the
wheel.
The pulley hook can increase the pulling capacity by approximately 55%.
Adjusting The Brake
The winch is equipped with a friction brake that hold the load when the power is off. The brake requires
adjustment if the load creeps while the power is off or if the brake slips while powering the load in or out.
Disconnect the boat from the winch.
Loosen the outer lock nut.
Tighten the inner lock nut to increase the load capacity or loosen to decrease the load capacity. The inner lock
nut must be tight enough to prevent the load from slipping or creeping.
Caution:
Do not over tighten the inner lock nut. Over tightening the inner nut can shorten the motor life.
Outer Lock Nut
Inner Lock Nut
