background image

LIMITED WARRANTY 

24 

 

Every new Fifield e-bicycle comes with our warranty. Once your Fifield e-Bike is registered with 
Fifield  Incorporated,  we  provide  each  original  retail  purchaser  a  warranty  against  defects  in 
materials and workmanship, as stated below: 

 
1 year 

 

Frame 

 

Electric motor, LCD, and controller 

 

Battery pack (or 500 charges, whichever comes first) 

 
This warranty applies to 2014 and newer model bicycles. Any other original part or component 
shall  be  covered  by  the  stated  warranty  of  the  original  manufacturer.  Any  products  not 
specifically included above are hereby omitted. Any other original part or component shall be 
covered  by  the  stated  warranty  of  the  original  manufacturer.  Any  products  not  specifically 
included above are hereby omitted. 

 
THIS WARRANTY DOES NOT COVER: 

 

Normal wear and tear 

 

Improper assembly 

 

Improper follow-up maintenance 

 

Installation of components, parts, or accessories not originally intended for or 
compatible with the bicycle as sold 

 

Damage or failure due to accident, misuse, abuse, or neglect 

 

Damages resulting from failure to follow Instructions for Use and Warnings as 
provided in the Owner’s Manual for the e-Bicycle 

 

Damages resulting from improper charging of the battery pack or use of any charger 
not supplied by Fifield e-Bicycles Incorporated 

 

Labor charges for part replacement or changeover 

 
This warranty is void in its entirety by any modification of the frame, fork, or components. This 
warranty is expressly limited to the repair or replacement of a defective item, and said repair or 
replacement  is  the  sole  remedy  of  the  warranty.  This  warranty  extends  from  the  date  of 
purchase, is offered only to the original owner, and is not transferable. This warranty applies 
only  to  Fifield  Incorporated  purchased  through  an  authorized  dealer  or  distributor.  Fifield 
Incorporated is not responsible for incidental or consequential damages. Some states do not 
allow  the  exclusion  of  incidental  or  consequential  damages,  so  the  above  exclusion  may  not 
apply to you. Any claim against this warranty must be made through an authorized dealer or 
distributor.  Proof  of  purchase  is  required.  A  bicycle  must  be  registered  with  Fifield 
Incorporated before a warranty claim may be processed. Claims made outside the country of 
purchase may be subject to fees and additional restrictions. Warranty, duration, and detail may 
differ by frame type and/or by country. This warranty gives you specific legal rights, and those 
rights may vary from  place  to place. This warranty does not affect your statutory rights. The 
English version of the warranty shall prevail.

Summary of Contents for Bonfire






























Reviews: