- 12 -
external sound card.
(Note: windows7/8/10 of 32bit or 64bit systems need to go to the official website to download and install the driver,
the driver package has detailed installation instructions. System of OSX does not need to install the driver, just
set M3 to DAC mode and connect to the computer with a USB cable; system of windows xp only storage is
supported, USB DAC is not supported)
3.9.7 Multifunction button
The multifunction button refers to the confirm button (the button on the side of the fuselage that is at the bottom
one). By selecting different settings through this item, different functions can be realized. When the Playback Control is
selected,in the now playing screen,shortly press it can be realized as the play/pause operation, while the non-play screen is
Shortly pressed, the confirm button can be used; when the item is selected as the Repeat, in the now playing screen when
the screen is on, this button is the repeat control. Under the other screens, this button is still used as the confirm button.
The repeat function is used as follows:
First, you need to set the “Multifunction button” to “Repeat”. When you play music in the screen for the first time,
press the side confirm button (hereinafter referred to as “Repeat button”) for the first time, the machine will press the
Repeat button from 00:00 to the current time. In one position (such as 01:00), the loop repeats playback. At this moment,
the status bar displays the AB mark icon, as shown in the left figure. When the repeat button is pressed again in the AB
state, the song will be pressed from the last time the repeat button is pressed (means 01:00)M3 resume normal playback.
During normal playback (assuming 02:00), when the repeat button is pressed again, the song wil loop repeat playback in
the last two pressed position intervals (from 01:00 to 02:00).
(Note: After switching songs, the original repeat mark information will not be memorized)
3.9.8 Button light
Press the confirm button to enter the adjustment screen. Slide the touch bar to adjust the brightness of the button
indicator. When the brightness level is adjusted to the lowest level, the button light will be off.
3.9.9 Theme
Shortly press the confirm button to enter the adjustment screen, slide the touch bar to select the corresponding
theme, and then press the confirm button again to confirm the select.
