2.0 USER INTERFACE
UL S2203
CyberCat 254/1016 Operation Manual
2-5
FM
P/N: 06-326-2
Rev 6, 09/2015
2.1.5
LCD DISPLAY
There are three main display screens for the CyberCat system: System Normal (no events present), System
Event (if events are present) and Top Level Menu. A brief description of each display is provided as follows.
2.1.5.1 SYSTEM NORMAL DISPLAY
The System Normal display, as shown in Exhibit 2-4, provides an example of the information presented on
the main display when the panel is in normal operating condition.
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
C Y B E R C A T v 7 . X X
B
F I K E C O R P O R A T I O N
C
0 8 : 0 0 : 0 0 A 1 0 / 0 1 / 2 0 1 5
D
A L : 0 0 0 S U : 0 0 0 T R : 0 0 0
Exhibit 2-4: System Normal Display
•
Row A - Provides a standard system message, including panel name and firmware version.
•
Row B – Displays a 20 character custom message that can be customized.
•
Row C - Displays the current time and date set for the system.
•
Row D – Displays the number of Alarm (AL), Supervisory (SU), and Trouble (TR) events currently
present on the system.
Note:
When a panel has cleared all local trouble and supervisory events but still has these events to
transmit on a networked system, the trouble (or supervisory) counter will alternately showing
‘000’
or
‘---‘
at
half-second intervals to indicate network transmissions are still occurring for that state.
In Normal state, the control panel does the following functions at normal intervals:
•
Supervises all SLC devices, panel circuits for device and circuit integrity
•
Transmits system event information to peripheral bus devices
Summary of Contents for CyberCat 1016
Page 135: ......
