Recording Custom Messages
Emergency Communication System Operation
FCP-300/FCP-300ECS Manual —
P/N LS10145-002FK-E:A 3/12/2021
131
2.
Use the Select Keys on the LOC to toggle the output areas to page with the microphone (illuminates the green LEDs).
3.
Speak into the microphone.
4.
Release PTT button when finished.
11.8 Recording Custom Messages
The FIK-Series FIK-NVCM include 15 recordable message slots. The Message 1-15 can be recorded from the microphone,
Aux Input or by using the Message Manager Utility of the HFSS Programming Tool. All messages can be a maximum of one
minute.
If the System is in the Record Mode, the FIK-NVCM switches will function as follows:
:
If you access the Local Record Mode, select Keys 1-15 to use to reference Message Slots 1-15. The associated green Select
Key will indicate that a message is currently programmed in the corresponding slot. When there is no message recorded (or the
message is erased), the associated green Select Key LED will be off. While recording a particular message, the red Select Key
will turn on until the recording is completed. The Select Key 1-15 will be used to playback a recorded message or to select a
message slot to record to or erase.
NOTE:
The Ready-to-Talk LED will illuminate after an output area has been activated.
Ready to Talk LED
ECS Message Key 3
ECS Message Key 1
ECS Message Key 8
Key
Function
ECS Message Key 1
Select message slot to record to
ECS Message Key 3
Start and stop the recording from Aux Audio Input
ECS Message Key 8
Erase user message 1-15
Select Keys 1-15
Message slot 1-15
Select Keys
1-15
Summary of Contents for FCP-300
Page 169: ...Cut Along the Dotted Line ...
Page 171: ...Cut Along the Dotted Line ...
Page 173: ...Cut Along the Dotted Line ...
Page 175: ...Cut Along the Dotted Line ...
