Assembling Procedure :
( 1 )
( 2 )
1. First, screw the clip head( 1 ) counterclockwise. Insert the nut fixing
tool(2) for assistant.
2. Press the lever( 1 ) then screw ( 2 ) under the clip head
by cross-screwdriver( 3 ), assembling procedure completed.
( 1 )
( 3 )
( 2 )
Disassembling Procedure :
reverse step according to the assembling procedure.
( 1 )
When the clip head can’t suit the size of aluminum lip in normal use,
adjust the nut(1) to loosen or fasten.
Screw the nut clockwise--loosen
Screw the nut counterclockwise--fasten