2
Tighten it with a ratchet knob from the top.
Connect one end of the DC cable to the mo-
tor and the other end to the controller.
Connect the motor to the camera platform
with the help of a screw, as shown in the
image.
NOTE:
Normal Mode
When the controller is turned on, green light
displays. In "normal mode" you have to con-
tinuously press the left/right button to give
direction. Use the speed knob to adjust the
variable speed while the carriage is in motion.
Orange light will blink when you operate the
speed knob.
NOTE:
Auto Mode
Bring the speed knob to 'zero', press the red
buttons together, & release to change the
mode to "auto mode". An orange light will dis-
play. Here, you have to press the left/right
button once to give the direction & then the
orange light starts blinking. Similarly, use the
speed knob to adjust the variable speed.
Plus Motion Control System
Setup
Motor Assembly
Assemble Controller with Motor
