Problem: Power Nozzle does not operate or pick up
Problem: Squeaky rollers on Power Nozzle
Apply liquid wax on axles of rollers.
14
ENGLISH
Do It Yourself Service Chart
Power Nozzle on/off switch is
“O” off
Move Power Nozzle on/off switch to
“I” on.
Hose plugs not connected
Review instruction on attaching the
Power Nozzle, making sure all plugs
are firmly connected.
Brush is not turning
Make sure all electrical plugs are firmly
connected. Push reset button on back of
nozzle. If this does not work, call your
local FILTERQUEEN
®
Distributor for service.
Obstructed neck
Run a wire through opening.
Obstructed wand
Run long wire or a straightened coat
hanger through wand.
Obstructed hose
Remove hose from inlet and attach to
exhaust port to blow out clogged debris.
If this does not work, run a broom han-
dle through hose.
Worn Brush
Call your local FILTERQUEEN
®
Distributor
for service.
Circuit Breaker Tripped
Unplug cord and check for an obstruc-
tion. After obstruction is cleared, push
reset button on back of nozzle. If this
does not work, call you local
FILTERQUEEN
®
Distributor for service
Cause:
Correction: