PREPARATION OF THE APPLIANCE
2.
Make sure that the main switch (1) is in the rest position, if not, disable it.
3.
Check that the plug (2) on the power cable (3) has been taken out of the socket (4) of the mains
supply, and if not, disconnect it.
WARNING: To prevent any damage to the mains socket, pull out the plug (2) from
the mains socket (4) by pulling the plug (2) directly instead of the power cable (3).
8.
INSERTING FILTER – PAPER COLLECTION BAG
To insert the filter – collection bag inside the collection tank, proceed as follows:
1.
Make sure the machine is in a safe condition (read “
MACHINE SAFETY
”).
WARNING: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
2.
Remove the vacuum hose (1) turning it anti-clockwise and remove it from the vacuum nozzle (2) in the
collection tank.
3.
Free the vacuum head from the collection tank, using the lever (3) on the front rear part of the collection
tank, moving the lever as indicated by the arrow in the picture on the side.
Page 9
