PREPARATION OF THE APPLIANCE
4.
Using the handle (4), in the vacuum head assembly, remove the vacuum head assembly from the
collection tank (rotating it and shifting it as indicated in the image).
5.
Lay the head gently on the floor.
6.
Insert the filter - paper collection bag inside the collection tank, taking care to insert the filter correctly into
the bulkhead (6) inside the collection tank and making sure not to damage the cardboard support (5) in
the bag itself.
WARNING: The filter – paper collection bag should only be used for collecting solid
waste.
7.
Using the handle (4), on the vacuum head assembly, position the vacuum head assembly on the
collection tank. Being very careful to insert the coupling levers (7) in the vacuum head inside the
interlocking couplings (8) in the collection tank.
8.
Secure the vacuum head to the collection tank, using the lever (3) on the front part of the collection tank,
moving the lever as indicated by the arrow in the picture on the side.
1.
Insert the vacuum hose (1) into the vacuum nozzle (2) in the collection tank. Being very careful to
position the teeth in the tube inside the grooving (9) in the nozzle. Rotate the vacuum hose in a clockwise
direction until it is fixed into the vacuum nozzle.
Page 10