22
MACHINE PREPARATION
22.
ASSEMBLING THE BRUSH (B-BT VERSIONS)
To assemble the brushes of the brush head unit, proceed as follows:
1.
Raise the brush head from the ground using the control handlebar.
2.
Check that the squeegee is raised from the ground; if not, lift using the lever (01).
3.
Turn the key operated main switch (02) to position “I".
WARNING: During this operation, check there are no people or objects near the
brush.
4.
Position the brush on the floor, near the machine brush head unit
5.
Lower the brush head unit, positioning it on the brush.
6.
Press the "AUTO" mode button (03)
7.
Pulse the dead man's lever under the control handlebar.
WARNING: During this operation, check there are no people or objects near
the brush.
WARNING: Check the brush is correctly inserted. If this is not the case, the
machine could move in an irregular, sudden manner.
23.
ASSEMBLING THE BRUSH (BB VERSIONS)
To assemble the brushes of the brush head unit, proceed as follows:
1.
Raise the brush head from the ground using the control handlebar.
2.
Check that the squeegee is raised from the ground; if not, lift using the lever (01).
3.
Set the main machine switch (02) to the “0” position.
WARNING: During this operation, check there are no people or objects near the
brush.
4.
Position the brush on the floor, near the machine brush head unit
5.
Lower the brush head unit, positioning it on the brush.
6.
Press the mode "II" button (02)
7.
Pulse the dead man's lever under the control handlebar.
WARNING: During this operation, check there are no people or objects near the
brush.
WARNING: Check the brush is correctly inserted. If this is not the case, the
machine could move in an irregular, sudden manner.
24.
TRANSPORTATION MODE
If you need to use the machine in transport mode, you must move on the control handlebar (01) (pressing it
down) and lift the rear of the machine so that the rear wheel (02) rests on the floor - this allows you to
transport the machine safely and easily.
WARNING: When carrying out the above, check that the squeegee is raised from
the ground; if not, ensure that this is done before proceeding.
