34
AT THE END OF WORK
11.
Attach the squeegee body to the squeegee connector.
12.
Insert the vacuum hose (07) into the sleeve (08) on the squeegee body.
13.
If necessary to empty the solution tank, unscrew the tap-filter (10) on the left-hand side of the machine,
and when finished, re tighten.
14.
Connect the electrical system connector (04) to the battery connector.
15.
Take the machine to the designated machine storage place.
16.
Disconnect the electrical connector (04) from the battery connector.
17.
Put the machine in rest mode. Using the control handlebar (11) (pushing downwards), lift the rear part
of the machine so that the rear wheel (12) rests on the floor.
WARNING: Park the machine in an enclosed place, on a flat and level surface; near
the machine there must be no objects that could either damage it, or be damaged
through contact with it.
