BRUSH CHOICE AND USE
POLYPROYLENE BRUSH (PPL)
It is used on every type of floor and it has good wear and hot water resistance (not exceeding 60 degrees C). PPL is not hygroscopic so that
it preserves its features even when working on wet surfaces.
BRISTLE THICKNESS
The thicker bristles are more rigid and so they are suitable for smooth floors with narrow joints.
On uneven floors, irregular surfaces or with deep joints, softer bristles are recommended which penetrate more easily in depth.
It should be remembered that, when the brush bristles wear out, that is as they are too short, they become stiff and cannot penetrate nor
clean in depth any longer also due to the fact that, as is the case with bristles that are too thick, the brush tends to bounce.
PAD HOLDER
The pad holder is recommended for cleaning polished surfaces. It is fitted with several anchor-shaped tips thanks to which it holds and drag
the abrasive pad during cleaning.
TABLE FOR BRUSH CHOICE
Machine
No. brushes
Code
Type of bristle
Ø
bristle
Ø
brush
Note
420000
420001
PPL
0.5
430
Minny 17
1
PPL
0.7
430
420002
Pad holder
430
-
PPL
0.5
-
Minny 20
1
-
PPL
0.7
-
Pad holder
-
-
20
