PREPARING TO WORK
5.
Turn the detergent flow adjustment knob (5) to the left, to the maximum flow position.
6.
Lower the brush head unit by actioning the pedal (6) located on the rear of the appliance.
7.
Lower the brush head unit using the lever (7) on the rear of the appliance.
8.
Action the dead man's levers (8) under the control handlebar, to allow activation of the appliance and the dosing system.
9.
Wait a few moments keeping the dead man's levers pressed (normally 40 to 60 seconds) to allow the dosing system to be triggered.
Page 20
