9
MACHINE PREPARATION
1.
HANDLING THE PACKAGED MACHINE
The machine is contained in specific packaging with a pallet for the handling with fork trucks. The
packages cannot be placed on top of each other.
The total mass of the machine with packaging is 76.5 kg (without batteries).
The dimensions of the packaging is as follows:
My50
A: 1145 mm
B : 665 mm
C: 1230 mm
A
C
B
2.
HOW TO UNPACK THE MACHINE
1.
Remove the outer packaging.
2.
The machine is fixed to the pallet with wedges which block the wheels.
3.
Remove the wedges.
4.
Use a chute to get the machine down from the pallet, pushing it backwards. Do not assemble the rear
squeegee before unloading the machine, and avoid violently jolting the brush head. To assemble the
squeegee, read the “ASSEMBLING THE SQUEEGEE” paragraph.
5.
Keep the pallet for any future transport needs.
WARNING: if the product is delivered in cardboard containers, handle the
packed product with suitable lifting means that comply with the legal
requirements.
3.
HOW TO MOVE THE MACHINE
1.
Make sure the solution tank and the dirty water compartment are empty
2.
Make sure the squeegee is UP
3.
Remove the brush from the brush head
4.
Place it on a pallet, using a chute
5.
Make sure the main switch is in the OFF position
6.
Secure the machine to the pallet using wooden wedges
