31
DAILY MAINTENANCE
40.
CLEANING DEBRIS HOPPER AND HOPPER VACUUM FILTER
Correct cleaning of the debris hopper and the related filter ensures that the working capacity is enhanced.
Proceed as follows for cleaning:
1.
make sure the recovery tank is empty, otherwise empty it completely
2.
Check that the main switch of the machine is set to "0"
3.
Ensure that the electrical system connector is disconnected from the battery connector
4.
Check that the parking brake is engaged, otherwise engage it using the pedal (1).
5.
Release the clamp (2) and pull on the handle (3) to remove the debris hopper; place it on the ground,
then take it to the appropriate disposal point and empty it
ATTENTION: This operation must be carried out wearing gloves to protect
against contact with dangerous solutions.
6.
Rinse the inside of the hopper with a jet of clean water
7.
Remove the debris hopper vacuum filter (4) and clean it using a jet of running water
8.
Release the clamp (2) and engage the debris hopper with the aid of the handle (3), attach the hopper
clamp
1
3
2
4
3
2
Summary of Contents for SMG130 S
Page 1: ...USE AND MAINTENANCE MANUAL SMG130 S ED 09 2019 ENG ORIGINAL INSTRUCTIONS Doc 10033803 Ver AB...
Page 45: ......
Page 46: ......
Page 47: ......
