background image

Page 14 

 

Warranty 

LIMITED WARRANTY FOR NEW FIMCO, INC. 

WHO MAY USE THIS LIMITED WARRANTY.  This limited warranty (the “Limited Warranty”) is provided  by Fimco, Inc. to the original purchaser 
(“you”) of the Equipment (as defined below) from Fimco, Inc. or one of Fimco, Inc.’s authorized dealers. This Limited Warranty does not apply to 
any subsequent owner or other transferee of the Equipment. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO 
HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.   

 

WHAT THIS LIMITED WARRANTY COVERS AND FOR HOW LONG.  Fimco, Ind. warrants that any new Equipment will be free from defects in  
material and workmanship for a period of 

one (1) year

 (homeowner), 

90 days 

(commercial user), after delivery of the Equipment to you (the 

“Warranty Period”). The Warranty Period is not extended if Fimco, Ind. repairs or replaces the Equipment.  

 

WHAT IS NOT COVERED BY THIS LIMITED WARRANTY.  This Limited Warranty does not apply to: (1) used Equipment; (2) any Equipment that has 
been altered, changed, repaired or treated since its delivery to you, other than by Fimco, Inc. or its authorized dealers; (3) damage or deprecia-
tion due to normal wear and tear; (4) defects or damage due to failure to follow Fimco, Inc.’s operator’s manual, specifications or other written 
instructions, or improper storage, operation, maintenance, application or installation of parts; (5) defects or damage due to misuse, accident or 
neglect, “acts of God” or other events beyond Fimco, Inc.’s reasonable control; (6) accessories, attachments, tools or parts  that were not manu-
factured by Fimco, Inc., whether or not sold or operated with the Equipment; or (7) rubber parts, such as tires, hoses and grommets.   

 

HOW TO OBTAIN WARRANTY SERVICE.  To obtain warranty service under this Limited Warranty, you must (1) provide written notice  to Fimco, 
Inc. of the defect during the Warranty Period and within 

thirty (30)

 days after the defect becomes apparent or the repair becomes necessary, at 

the following address: Fimco, Inc., 1000 Fimco Lane, North Sioux City, SD 57049; and (2) make the Equipment available to Fimco, Inc. or an  
authorized dealer within a reasonable period of time. For more information about this Limited Warranty, please call: 

800-831-0027

 

 

WHAT REMEDIES ARE AVAILABLE UNDER THIS LIMITED WARRANTY.  If the conditions set forth above are fulfilled and the Equipment or any part 
thereof  is  found  to  be  defective,  Fimco,  Inc.  shall,  at its  own  cost,  and  at  its  option,  either  repair  or  replace  the  defective  Equipment  or  part. 
Fimco, Inc. will pay for shipping and handling fees to return the repaired or replacement Equipment or part to you.   

 

LIMITATION OF IMPLIED WARRANTIES AND OTHER REMEDIES.  THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES, 
AND  FIMCO,  INC.’S  SOLE  LIABILITY,  FOR  ANY  BREACH  OF  THIS  LIMITED  WARRANTY.  TO  THE  EXTENT  APPLICABLE,  ANY  IMPLIED  WARRANTIES, 
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIM-
ITED  IN  DURATION  TO  THE  WARRANTY  PERIOD,  AND  THE  REMEDIES  AVAILABLE  FOR  BREACH  THEREOF  SHALL  BE  LIMITED  TO  THE  REMEDIES 
AVAILABLE  UNDER  THIS  EXPRESS  LIMITED  WARRANTY.  SOME  STATES  DO  NOT  ALLOW  LIMITATIONS  ON  HOW  LONG  AN  IMPLIED  WARRANTY 
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL FIMCO, INC.’S LIABILITY UNDER THIS LIMITED WARRANTY EX-
CEED THE ACTUAL AMOUNT PAID BY YOU FOR THE DEFECTIVE EQUIPMENT, NOR SHALL FIMCO, INC. BE LIABLE, UNDER ANY CIRCUMSTANCES, 
FOR  ANY  CONSEQUENTIAL,  INCIDENTAL,  SPECIAL  OR  PUNITIVE DAMAGES  OR  LOSSES,  WHETHER  DIRECT  OR  INDIRECT.  SOME  STATES  DO  NOT 
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 
APPLY TO YOU. 

 

Summary of Contents for 110-3PT-17N-XL















Reviews: