background image

Page 1 

 

OWNER’S MANUAL

 

Category I or II

 

Model: 300-3PT-17N (5303086) 

(300 Gallon 3-Point Sprayer w/8-Row Boom, Handgun, Pump, Coupler & Agitator

)

 

www.fimcoindustries.com 

1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD  57049      

Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440 

[5195389   

 

 

 

 

 

(09/20)] 

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON, PLEASE CALL

1-800-831-0027

MONDAY-FRIDAY, 8:00 AM TO 5:00 PM CST

If you should have a question or experience a problem with

your Fimco Industries Product: Visit our website @ 

www.fimcoindustries.com or call the Toll free number above. Our 

technical support representatives will be happy to help you. 

In most cases a customer service rep. can resolve

the problem over the phone.

To obtain prompt, efficient service, always remember to give the 

following information....

• Correct Part Description and/or part number

• Model number and Serial Number

Part descriptions and numbers can be obtained from the

illustrated parts list section(s) of this manual.

General Information 

Thank you for purchasing this product. The purpose of this 

manual is to assist you in operating and maintaining your  

3 Point sprayer.  

Retain a copy of your receipt for your unit, as it will be required 

to validate any warranty service. 

 

Warranted against manufacturer or workmanship defects from 

date of purchase with copy of receipt: 

 

Homeowner Usage: One Year 

 

Commercial Usage: 90 Days.

 

Assembly Instructions 

1. 

Install the preassembled tee valve sub-assembly to the 3-point 

carrier valve mount and position as shown. 

2. 

Slide a hose clamp on to the 

bypass hose (from the relief 

valve), then with a twisting 

motion, slip the bypass hose 

over the fitting on the top of 

the tank. Slide the hose clamp 

to the end of the hose and 

secure. 

Summary of Contents for 300-3PT-17N















Reviews: