Page 2
Step 7:
Invert your cart.
It is now ready for use.
Step 1:
Turn the hopper upside down for ease of assembly.
Bolt axle housing to the underside of the hopper, using the
3/8” round head screws.
Assembly Instructions
Step 2:
Bolt handle and yoke brace
to the front of the cart
(sandwich the flat plate on
the handle between the hop-
per and the yoke brace
when bolting).
Step 3:
Bolt the front tubes of the
handle to the hopper.
Step 4:
Position the tongue assembly on the axle housing and the
yoke brace so that the tongue latch is facing forward and
pointing downward.
Step 5:
Slide the axle into the
axle housing and
through the rear hole
in the tongue member.
Step 6:
Position the tires onto the axle and place a machinery bush-
ing over the axle and against the tire hub. Use a cotter pin to
hold the wheels in position.
Folding Tongue:
Remove front clevis pin, fold arm back, secure arm with
the clevis pin through the back hole.
To Unfold Tongue:
Remove clevis pin from back hole, fold arm forward,
secure with the clevis pin through the front hole.
