Intake/Siphon Tube/Screen Detail of a Typical L&G/ATV Sprayer (not including the 'EC' units)
to Inlet of Pump
- Make sure the valve in turned to the 'Open' position before restarting your pump.
- Remove the screen and clean as necessary. Replace when done and reassemble the entire assembly.
- Swing (swivel) the intake assembly towards you. Look in the nut you JUST unscrewed. There is a screen/washer there.
- Unscrew the knurled nut from the shut-off valve, leaving the valve connected to the tank.
- Shut the nylon valve to the 'Closed' position. (lever is perpendicular to the flow of fluid)
It is at this location so you can shut off the flow of solution, to access your system's screen, for cleaning.
A nylon shut-off valve is threaded onto the pipe nipple, at the intake location on the tank.
(see Detail Views) Reach in and rotate it, as needed, if not already in this position.
which should be rotated so that it just touches the bottom of the tank surface.
The suction line of your sprayer should contain a 'siphon tube', or 'intake tube',
Strainer, 1" Filter Washer
Knurled Nut
'Cut' View of a 'Typical' Tank
Checking/Cleaning the sprayer's filter/screen:
Nylon Shut-Off Valve (3/4" GHT)
Siphon Tube
touches the bottom of the tank.
rotated so that the tube just
Make sure the siphon tube is
"Open"
Valve
(looking inside)
"Closed"
Valve
Page 6
Repair Parts List Model: LG-25-BL (5302183)
Item
No
Part
Number
Qty Description
1
5006209
1 Poly Knurled Swivel Nut, 3/4" FGHT
2
5006307
12 5/16"-18 Hex Whiz (Flange) Locknut
3
5016066
1 Garden Hose Washer
4
5020065
2 Hose, 3/8"-1 Brd. x 40"
5
5020215
1 Hose, 3/8"-1 Brd. x 15 Ft.
6
5034220
4 Round U-Bolt, 5/16"-18 x 1 5/16" x 1 3/4"
7
5034531
4 5/16"-18 x 5/8" Flange Lock Screw
8
5034562
4 5/16"-18 x 5/8" Flange Bolt w/Locking Patch
9
5038667
1 Tank Mounting Plate (L.H.) (ATV)
10
5038725
1 Tank Mounting Plate (R.H.) (ATV)
11
5051122
1 5/8" Black Nylon Loom Cable Clamp
12
5051144
6 Hose Clamp (3/8")
13
5053110
2 Plastic Retaining Clip 14 Ga. & 16 Ga.
14
5058188
1 Tank Lid w/Lanyard
15
5075018
1 Grommet
16
5095319
1 Nozzle Mount - QJ100 (Left Side)
17
5095320
1 Nozzle Mount - QJ100 (Right Side)
18
5100359
1 Poly Bypass "J" Hose (3.8/2.1 - 25 Gal.)
19
5100452
1 Siphon Tube
20
5117168
3 #10-24 x 1" Phillips Truss Head Machine Screw
21
5117234
1 #10-24 x 1/2" Phillips Truss Head Machine Screw
22
5117314
1 #10-24 x 3" Truss Head Machine Screw
23
5127192
1 Manifold Spacer (3.8gpm)
24
5167007
1 Pressure Gauge, 0-100 p.s.i.
25
5169243
1 25 Gallon (New Style) Tank
Item
No
Part
Number
Qty Description
26
5273959
1 Deluxe Pistol-Grip Handgun w/X-26 Tip
27
5274373
1 Drain Plug Cap, Tether, and Washer Assembly
28
5274443
1 Lead Wire Assembly (w/Switch), 96"
29
5274880
1 Handgun Clips & Screws (Pkg/2) (#10-24 Thread)
30
5275704
1 Gold Series 3.8 g.p.m. Pump
31
5275877
1 Intake Sub-Assembly
31.1
5143188
1 Nylon Shut-Off Valve (3/4" GHT)
31.2
5168833
1 Port Kit Fitting, 1/2" Hose Barb
31.3
5116242
1 Strainer, 1" Filter Washer
31.4
5149035
1 Poly Swivel, 1/2" Hose Barb
31.5
5006209
1 Poly Knurled Swivel Nut, 3/4" FGHT
31.6
5051114
2 Hose Clamp (3/8"-1/2")
31.7
5020497
1 1/2" Polyspring Hose x 6"
32
5277787
1 Manifold Assembly
32.1
5005190
1 Poly Adapter Coupler, 3/4" FGHT x 1/2" FNPT
32.2
5005195
1 Poly Adapter, 1/2" MNPT x 3/4" MGHT
32.3
5006209
3 Poly Knurled Swivel Nut, 3/4" FGHT
32.4
5010236
1 Poly Elbow, 1/2" FNPT x 1/2" FNPT
32.5
5010430
1 Port Kit Elbow, 1/2" FNPT
32.6
5016066
4 Garden Hose Washer
32.7
5041073
1 Poly Reducing Bushing, 1/2" MNPT x 1/4" FNPT
32.8
5143188
1 Nylon Shut-Off Valve (3/4" GHT)
32.9
5143204
1 Dual Hose Shut-Off "Y" Valve
32.10 5143405
1 Manifold w/Mounting Tab
32.11 5149034
3 Poly Swivel, 3/8" Hose Barb
33
5277798
2 Elbow Nozzle Assembly (Boomless Tips)
