Exploded View/Parts List:
LG-30-S (5301478)
6
8
11
5
15.7
15.2
15.6
15.5
15.4
15.3
15.1
9
4
13
12
3
14
10
1
2
2
7
Intake/Siphon Tube/Screen Detail of a Typical L&G/ATV Sprayer (not including the 'EC' units)
to Inlet of Pump
Strainer, 1" Filter Washer
- Make sure the valve in turned to the 'Open' position before restarting your pump.
- Remove the screen and clean as necessary. Replace when done and reassemble the entire assembly.
- Swing (swivel) the intake assembly towards you. Look in the nut you JUST unscrewed. There is a screen/washer there.
- Unscrew the knurled nut from the shut-off valve, leaving the valve connected to the tank.
- Shut the nylon valve to the 'Closed' position. (lever is perpendicular to the flow of fluid)
It is at this location so you can shut off the flow of solution, to access your system's screen, for cleaning.
A nylon shut-off valve is threaded onto the pipe nipple, at the intake location on the tank.
(see Detail Views) Reach in and rotate it, as needed, if not already in this position.
which should be rotated so that it just touches the bottom of the tank surface.
The suction line of your sprayer should contain a 'siphon tube', or 'intake tube',
Checking/Cleaning the sprayer's filter/screen:
Nylon Shut-Off Valve (3/4" GHT)
Siphon Tube
"Closed"
Valve
touches the bottom of the tank.
rotated so that the tube just
Make sure the siphon tube is
Knurled Nut
"Open"
Vlave
(looking inside)
'Cut' View of a 'Typical' Tank
Page 3
(List Prices are Subject to Change)
Item
No
Part
Number
Qty Description
List
Price
1
5020215
1 Hose, 3/8"-1 Brd. x 15 Ft.
10.78
2
5051114
2 Hose Clamp (3/8"-1/2")
.66
3
5051122
1 5/8" Black Nylon Loom Cable Clamp
.25
4
5058188
1 Tank Lid w/Lanyard
10.95
5
5100452
1 Siphon Tube
1.25
6
5117167
4 #10-24 x 5/8" Phillips Truss Head Machine Screw
.26
7
5117234
1 #10-24 x 1/2" Phillips Truss Head Machine Screw
.26
8
5168836
1 Port Kit Fitting, 3/8" Hose Barb
2.33
9
5169244
1 30 Gallon (New Style) Tank
73.35
10
5273959
1 Deluxe Pistol-Grip Handgun w/X-26 Tip
30.00
11
5274373
1 Drain Plug Cap, Tether, and Washer Assembly
3.08
Item
No
Part
Number
Qty Description
List
Price
12
5274443
1 Lead Wire Assembly (w/Switch), 96"
10.39
13
5274880
1 Handgun Clips & Screws (Pkg/2) (#10-24 Thread)
2.97
14
5275703
1 Gold Series 2.1 g.p.m. Pump (60 psi, 8 Amp)
117.00
15
5275877
1 Intake Sub-Assembly
8.68
15.1 5143188
1 Nylon Shut-Off Valve (3/4" GHT)
3.33
15.2 5168833
1 Port Kit Fitting, 1/2" Hose Barb
2.33
15.3 5116242
1 Strainer, 1" Filter Washer
.33
15.4 5149035
1 Poly Swivel, 1/2" Hose Barb
.68
15.5 5006209
1 Poly Knurled Swivel Nut, 3/4" FGHT
.73
15.6 5051114
2 Hose Clamp (3/8"-1/2")
.66
15.7 5020497
1 1/2" Polyspring Hose x 6"
2.49
