Page 2
Exploded View/Parts List:
TC-10-P (5301461)
Assembly Instructions
Step 1: Turn the hopper upside down for ease of assembly
Step 2: Bolt axle housing to the underside of the hopper, using the 3/8” round head screws
Step 3: Bolt handle and yoke brace to the front of the cart (sandwich the flat plate on the handle between the hopper and the yoke
brace when bolting).
Step 4: Bolt the front tubes of the handle to the hopper
Step 5: Position the tongue assembly on the axle housing and the yoke brace so that the tongue latch is facing forward and pointing
downward
Step 6: Slide the axle into the axle housing and through the rear hole in the tongue member
Step 7: Position the tires onto the axle and place a machinery bushing over the axle and against the tire hub. Use a cotter pin to hold
the wheels in position
Step 8: Invert your cart. It is now ready for use
Folding Tongue:
Remove front clevis pin, fold arm back, secure arm
with the clevis pin through the back hole.
To Unfold Tongue:
Remove clevis pin from back hole, fold arm forward,
secure with the clevis pin through the front hole.
Tongue Assembly
#5275097
See Tongue
Assembly Below
