Page 2
Step 5:
Invert your cart.
It is now ready for use.
Assembly Instructions
Step 2:
Bolt the yoke brace and flat plate to the front of the cart
(sandwich the flat plate between the hopper and the yoke
brace, with the ’ears’ of the flat plate facing rearward).
Step 3:
Position the tongue assembly on the axle housing and the
yoke brace so that the tongue latch is facing forward and
pointing downward.
Slide the axle into the axle housing and through the rear hole
in the tongue member.
Step 4:
Position the tires onto the axle and place a machinery bush-
ing over the axle and against the tire hub. Use a cotter pin to
hold the wheels in position.
Step 1:
Turn the hopper upside down for ease of assembly.
Bolt axle housing to the underside of the hopper, using the
3/8” round head screws.
