IT
AL
IA
NO
USE AND MAINTENANCE MANUAL
USE AND MAINTENANCE MANUAL
Fimer S.p.a.
thanks you for selecting this unit, it will prove to be a useful, problem-free
tool for many years to come if the instructions contained in this manual are followed scru-
pulously.
This manual must be considered as an integral part of the unit and must accompany it
when it change location or is resold.
The user must assume responsability for maintaining this manual intact and legible at all
times.
Fimer S.p.a.
reserves the right to modify this manual at any time without notice.
All rights of translation and total or partial reproduction by any means whatsoever (inclu-
ding scanner, photocopy, film, and microfilm) are reserved and reproduction is prohibited
without the express written consent of
Fimer S.p.a.
INDEX
INDEX
• WARNING SYMBOLS .................................................................................................
...................................................................................................... pag. 14, 15, 16
1. MIG WELDING ...................................................................................... pag.17
2. POWER SUPPLY CONNECTION ......................................................... pag.17
3. OUTPUT CONNECTIONS .................................................................... pag.17
4. UNIT DESCRIPTION ............................................................................ pag.18
5. INSTALLATION OF THE WELDING WIRE .......................................... pag.21
6. CONNECTION BETWEEN THE SEPARATE TROLLEY AND BASE ............ pag.22
7. CONNECTION OF THE GAS CYLINDER AND REGULATOR. ..................... pag.23
8. MIG TORCH .......................................................................................... pag.23
9. PREPARING FOR THE WELDING ....................................................... pag.23
10. WELDING PROCESS ......................................................................... pag.24
11. HOW TO OBTAIN THE BEST WELDING RESULTS ......................... pag.24
12. REGULATING THE WELDING MACHINE ......................................... pag.24
13. TROUBLESHOOTING ........................................................................ pag.25
14. WIRE LINER REPLACEMENT ........................................................... pag.26
15. INSTALLATION INSTRUCTIONS FOR
INDOOR WATER COOLING SYTEM ...................................................... pag. 27
16. SPARE PARTS ................................................................................... pag. 32
17. BLOCK DIAGRAM TM 230 - TM 260 ............................................... pag. 33
18. BLOCK DIAGRAM TM 300 .............................................................. pag. 34
19. BLOCK DIAGRAM TM 350 - TM 320W - TM 360W .......................... pag. 35
20. BLOCK DIAGRAM TM 420W - TM 500W - TM 650W ...................... pag. 36
EN
G
LI
SH
DE
UT
SC
H
FR
AN
ÇA
IS
ES
PA
ÑO
L
РУ
СС
КИ
Й
13
