http://www.FinaleAudio.com
|
USER MANUAL
F-208a/F-208b / F-308
3
QUICK CONNECTIONS:
1.
Plug in all tubes at correct locations (EL84 / 6BQ5 / 7189 Quad at the rear four
tube sockets and one pair of 12AX7 / ECC83 in the front sockets – see above
picture).
2.
Connect your source to RCA Jacks (Red/White RCA cables for signal inputs) on
the left side of the amplifier, and connect speaker wires (Red/Black Binding
Posts) in the back of the amplifier. Connect 8 or 4 ohms, according to your
speakers rating.
3.
Plug in power cord (Do this at last, in case the power switch is on)
4.
Turn ON the power button in the back
5.
Select your source input via Selector knob (The knob on the left)
6.
Turn to suitable volume Via Volume Knob (The knob on the right - And is a good
practice to dial volume to lowest before start and after finish)
