IB1C71 - 08/11
13
14
15
8A EE
BATTERY
The thermostat provides 3 stages of battery alert:
-
Battery icon is ON
: the operation will be soon compromised.
-
Battery icon blinking
: it is necessary to change the batteries.
-
BATT blinking
: Both the thermostat and its output relay are in
the OFF state.
To fit/change the batteries, see fig.3.
Dispose of batteries according to local regulations.
NOTE
If the batteries are changed at the first alert, no data will be lost.
PIN (display lock)
: the display shows 4 digits (0000); change this
number using the keys and confirm with ;
Confirm as 0000 and the PIN is not active (PIN not required to unlock
the display). Confirm a number other than 0000 and the PIN is active
(PIN required to unlock the display).
NOTE
If you forget your PIN, insert the unlock PIN code 5137.
After which, enter "advance setting" and establish a new
PIN code.
Dat Setting: set one of the Dat codes using the keys and
Dat 0
: allows day of the week and day number to be reassigned.
Dat 1
: sets automatic update of daylight saving time.
Dat 2
: sets no automatic update of daylight saving time.
OK
8A E 1
OK
0000
OK
DISPLAY LOCK (easy)
Press the key for 2 seconds, and 3 beeps will confirm that the
display is locked (except that touching the displayed temperature
will change it to the current time for a few seconds).
To unlock the display, press the key for 2 seconds.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
3
20:8
°C
2300
OK
DISPLAY LOCK
DISPLAY LOCK (PIN)
Press for 2 second; the display will show 4 digit; with insert
the PIN set previously on "advance setting" menu and confirm with
to apply the lock. (Touching the displayed temperature will change it to
the current time for a few seconds).
To unlock the display press the key for 2 sec; enter the correct PIN
code and press .
Entering the wrong PIN, and the display shows ERR.
OK
OK
OK
