background image

IMPORTANT SAFEGUARDS 

 

When using electrical appliances, basic safety precautions should 
always be followed. These instructions should be saved for future 
reference: 

 

 

Read and familiarise yourself with all operating instructions before 
using this Double Hot Plate. 

 

Before plugging your unit into the mains, visually check that the unit is 
intact and has not suffered any transit damage. 

  Check that the voltage indicated on the data plate corresponds with 

that of the local network before connecting the appliance to the mains 
power supply. 

  Close supervision is required when using this appliance near children. 

  This appliance can be used by children aged from 8 years and above 

and persons with reduced physical, sensory or mental capabilities or 
lack of experience and knowledge if they have been given supervision 
or instruction concerning use of the appliance in a safe way and 
understand the hazards involved. Children shall not play with the 
appliance. Cleaning and user maintenance shall not be made by 
children unless they are older than 8 and supervised. 

 

  Keep the appliance and its cord out of reach of children less than 8 

years. 

 

 

Do not

 

touch hot surfaces.

 

The outer surfaces are liable to get

 

hot 

during use. Always use the

 

handles and knobs.

 

 

  Do not immerse the appliance or its cord in water or any other liquids. 

  Do not leave the appliance unattended during use. 

  Do not leave the appliance unattended whilst connected to the mains 

supply. 

  Always use this appliance on a solid, level, non-flammable surface. 

  Do not use this appliance outdoors. 

  Do not use this Double Hot Plate with a programmer, timer, separate 

remote-control system or any other device that switches the appliance 
on automatically. 

  It is imperative to unplug the power cord after the appliance has been 

used, before it is cleaned and whilst being repaired. 

  Repairs to electrical appliances should only be performed by a 

qualified electrician. Improper repairs may place user at serious risk. 

  Do not operate this appliance with a damaged plug or cord, after a 

malfunction or after being dropped or damaged in any way. 

  Regular, periodic checks should be carried out on the mains cable to 

Summary of Contents for SDA42








Reviews: