Step 5: Assemble the Seat Post
a) Insert Plastic Sleeve (63) into seat post housing on the Main Frame (1) until you
hear a click. Make sure the plastic sleeve is properly fitted.
b) Slide the Seat Post (2) into the Plastic Sleeve (63), then retighten the Pop Pin (23).
Step 6: Assemble the Seat and Seat Slider
a) Slacken the Pop Pin (88) and slide the Seat Slider (3) into the Seat Post (2), until
you hear a click, then re-tighten the Pop Pin.
b) Insert the Seat (22) onto the Seat Slider (3), tighten locknuts on both sides of the
seat
11
WARNING
：
When you are adjusting the
height of seat, always make
sure the L shape Pop Pin is
properly inserted into the
hole
.
NOTE
：
1. Both locknuts on the two
sides of bike seat need to
be tightened.
2. Adjust the seat angle for
best riding experience.
