background image

LIMITED WARRANTY & LIMITATION OF LIABILITY

Fine Instruments Corporation (Finest) warrants this product to be free from defects
in  material  and  workmanship  under  normal  use  and  service  f or  3  years.  This
warranty  extends  only to  the  original  buyer  or  end-user  customer  of  a  Finest
authorized reseller, and is not applied to fuses, battery or to any product which, in
Finest’s option, has been misused, altered, neglected or damaged by accident or
abnormal conditions of operation or handling.
Finest   warrants  that  sof tware  will  operate  on  appropriate  Finest  instruments
substantially in accordance with its functional specifications for 90 days and that it
has been properly recorded on non-defective media. Finest does not warrant that
software will be error free or operate without interruption.

Finest authorized resellers shall extend this warranty on new and unused products
to end-user customers only but have no authority to extend a greater or different
warranty on behalf of Finest.

Finest’s warranty obligation is limited, at Finest’s option, to refund of the purchase
price,  or free  of   charge  repair  or replacement  of  a  defective product  which  is
returned to the Finest’s factory within the warranty period.

To obtain warranty service, contact your nearest Finest authorized reseller or send
the product, with a description of the difficulty, postage and insurance prepaid (FCA
Destination), to the nearest Finest authorized reseller. Finest assumes no risk for
damage in transit. Finishing warranty repair, the product will be returned to Buyer,
transportation prepaid (FCA Destination). If Finest determines that the failure was
caused  by  misuse,  accident ,  abnormal  condit ion  of  operation  /  handing,   or
alteration, Finest will provide an estimate of repair costs and obtain authorization
before commencing the repair work. Finishing repair, the product will be returned to
the  Buyer transportat ion prepaid  and  the  Buyer  will  be  billed  for  the  repair  and
return transportation charges (FCA shipping Point).

Warranty  service  is  available  out side  the  Republic  of  Korea  only  if  product  was
purchased through a Finest Authorized Sales Outlet in the country of use. Finest
reserves the right to invoice Buyer for importation costs of repair/replacement parts
when product purchased in one country is submitted for repair to the Finest factory
in the Republic of Korea.

DISCLAIMER

THIS WARRANTY  IS  IN LIEU  OF ANY  OTHER  WARRANTIES, EXPRESSED OR
IMPLIED,  INCLUDING ANY WARRANTY  OF MERCHANTABILITY OR FITNESS FOR
A  PARTICULAR  PURPOSE. FINEST  SHALL  NOT BE  LIABLE  FOR  ANY  SPECIAL,
I NDIRECT,  I NCIDE NTA L  O R  CONS EQUE NTI AL  DAMA GE S  O R  LO SS ES,
INCLUDING  LOSS OF DATA, WHETHER  ARISING FROM  BREACH OF WARRANTY
OR BASED ON CONTRACT, TORT, RELIANCE OR ANY OTHER THEORY.

Summary of Contents for 701
















Reviews: