For more information, contact us
info@finixa.com
MANUAL CSG 00
COMBI SEALANT GUN
Applying non-sprayable sealant
SAFETY ADVICE
Never direct a jet of air at people or ani-mals. Do not point this gun at any other person. Follow the instructions of
the sealant – adhesive manufacturer. Wear appropriate P.P.E. Do not spray when other people are in the vicinity
and do not allow children anywhere near your spraying equipment. Make sure the air pressure is no more than 10
bar (145 Psi). Do not spray in enclosed areas and maintain good ventilation.
Caution:
Take the cartridge out of the gun after use even if it is not empty. Keep inner nozzle (pos. 7 - white
colour) and outer nozzle (pos. 5-6 black colour) always clean. Before using the gun, ensure that cured sealant is
not blocking the nozzle orifice. If necessary, clean with a thin steel pin. A blocking nozzle can cause a danger-
ous situation even if the gun is not connected to the compressed air.
1
Open the cartridge.
4
Connect the compressed air at
a pressure of about 6 bar and
close both the pressure regula-
tors (3 and 4), turning them in a
clockwise direction.
2
Cut the nozzle fitted
on the cartridge to suit
your requirements.
5
Pull the trigger (2)
6
Now gently open the
back regulator (4) and
adjust the product supply
3
Put the adapter (8) onto the
cartridge, insert the cartridge
in the gun and tighten the
ring-nut.
www.finixa.com
Deze handleiding is ook beschikbaar in het Nederlands • kijk op
www.finixa.com
Ce manuel est également disponible en français • consultez le site
www.finixa.com
Diese Anleitung ist auch in deutscher Sprache erhältlich • besuchen Sie die Webseite
www.finixa.com
Este manual está disponible también en el idioma español , favor acceder a
www.finixa.com
