English
- 33 -
Date, Time, Time Settings Mode and Time Zone
Setting will be available.
Use “ ” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing “
” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
Changes are automatically stored. Press “
•
MENU
”
to exit.
Configuring Source Settings
You can enable or disable selected source options.
The TV will not switch to the disabled source options
when
“SOURCE”
button is pressed.
Select
•
Sources
in the Settings menu and press
OK
button.
Press“
•
” or “ ” buttons to select a source.
Use “
•
” or “ ” button to enable or disable the
selected source. Changes are automatically
stored.
Configuring IP Settings
On IP Settings window you can set IP address of
the TV set, which connects the TV to the Internet. IP
address can be either static or dynamic. Static means
that the address is given by service supervisor and
that you know. Also subnet mask and DNS Server’s
IP addresses should be set correctly.
If the IP address is not known or if a specific IP is
not used, you can press Blue (Dynamic) button.
With this selection a new IP address is taken from
service supervisor and addresses are displayed on
this menu. IP address setting fields can be edited if
Dynamic is selected, otherwise it is not available if
Static is selected. This menu is functional if an Internet
connection is present and if the ethernet cable is
plugged. If a connection problem occurs or the TV
does not connect to the Internet, menu screen will be
displayed as below and link status shown as Bad.
Wi-Fi Settings (Optional)
Wi-Fi feature can be used for a wireless network
connection. The feature is used for infrastructure
purposes only, such as connecting to the web. Press
BLUE button to configure IP settings when Wi-Fi menu
is displayed on the screen. Refer to IP Setting section
for more information about ip settings.To enable Wi-
Fi feature, profi les should be confi gured properly.
Please plug in the Wi-Fi dongle to one of the USB
ports. Select information tab from Wi-Fi settings menu.
Device status should be set as enabled by pressing
the
OK
button. Wait until the IP the address is shown
on the secreen. This means that the connection
is now established. To disconnect from a wireless
network, you should highlight connection status and
press
OK
.
