English
- 34 -
You can navigate between menu tabs by pressing
left/right buttons. The help bar on the bottom of
the dialog shows features that you may use. Press
GREEN button to start searching for available wireless
networks while device status is set as Enabled and
Connection status is set as Not connected.
Information
Device Status:
Displays wi-fi status as enabled or
disabled.
Connection Status:
Displays wi-fi connection as
enabled or disabled.
Network Name:
Connected networks’ name will be
displayed.
IP:
Displays the current ip address.
Saved Profiles
Saved profiles’ names are listed on the left side. You
can add ,delete or modify a profi le on this screen.
Connecting to your Cell Phone via WiFi
(Optional)
If your cell phone has WiFi feature, you can connect
•
your cell phone to your TV by using WiFi connection
via a router, in order to play content from your phone.
For this, your cell phone must have an appropriate
sharing software.
Connect to your router following the steps stated
•
above in the Wireless Connection section.
Afterwards, engage your cell phone with the router
•
and then activate sharing software on your cell
phone. Then, select files that you would like to share
with your TV.
If the connection is established correctly, you should
•
now access the shared files of your cell phone via
the Media Browser of your TV.
Enter Media Browser menu and playback device
•
selection OSD will be displayed. Select your cell
phone’s ident and press
OK
to continue.
Note: This feature may not be supported by some
cell phones.
Configuring Other Settings
To view general configuration preferences, select
Other Settings
in the Settings menu and press
OK
button.
Operation
Press “
•
” or “ ” buttons to select an item.
Use “
•
” or “ ” button to set an option.
Press
•
OK
button to view a sub-menu.
Menu Timeout
: Changes timeout duration for menu
screens.
Scan Encrypted
: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as
Off
, encrypted channels will not be located
in automatic search or manual search.
Blue Background
: Activates or deactivates blue
background system when the signal is weak or
absent.
Software Upgrade
: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
