background image

English   

- 3 -

Cleaning

Before cleaning, unplug the TV set 
from the wall outlet. Do not use liquid 
or aerosol cleaners. Use a soft and 
dry cloth. 

Ventilation

The slots and openings on the TV set are intended for 
ventilation and to ensure reliable operation. To prevent 
overheating, these openings must not be blocked or 
covered in anyway.

Heat and Flames

The set should not be placed near to 
open 

fl

 ames or sources of intense heat 

such as an electric heater. Ensure that 
no open 

fl

 ame sources, such as candles, 

are placed on top of the TV. Batteries should not be 
exposed to excessive heat such as sunshine, 

fi

 re or 

the like.

Lightning

In case of storm and lightning or when 
going on holiday, disconnect the power 
cord from the wall outlet. 

Replacement Parts

When replacement parts are required, make sure that 
the service technician has used replacement parts, 
which are speci

fi

 ed by the manufacturer or have the 

same speci

fi

 cations as the original one. Unauthorized 

substitutions may result in 

fi

 re, electrical shock or 

other hazards.  

Servicing

Please refer all servicing to quali

fi

 ed 

personnel. Do not remove the cover 
yourself as this may result in an electric 
shock.

Waste Disposal

Instructions for waste disposal:
• Packaging and packaging aids are recyclable and 
should principally be recycled. Packaging materials, 
such as a foil bag, must be kept away from children. 
• Batteries, including those which are heavy metal-
free, should not be disposed of with household waste. 
Please dispose of used batteries in an environmentally 
friendly manner. Find out about the legal regulations 
which apply in your area.
• Do not try to recharge batteries, there is a danger 
of explosion. Replace batteries only with the same 
or equivalent type.
This symbol on the product or on its packaging means 
that your electrical device should be 
disposed at the end of its service life 
separately from your household wastes. 
There are separate collection systems for 
recycling in the EU. For more information, 

please contact the local authority or the dealer where 
you purchased the product.

Disconnecting the Device

The mains plug is used to disconnect the TV set 
from the mains and therefore it must remain readily 
operable.

3D Mode and 3D Images

Read and understand the following safety 
precautions carefully for your safety before using 
the 3D function. 

You may experience discomfort, headaches 

• 

or dizziness while watching 3D images. If you 
experience such symptoms, you should remove 3D 
glasses and stop watching 3D mode.
Take regular breaks while watching 3D images. The 

• 

length and frequency of breaks may change from 
person to person. You must decide what works best 
for you. If you experience discomforts such as eye 
strain or nausea while watching 3D images for a 
long time, remove 3D glasses, stop watching 3D 
mode and rest. You should consult a doctor if you 
believe it is necessary.
It is recommended that an adult should check 

• 

on children if the children are using 3D function. 
If they experience symptoms such as dizziness, 
headaches or eye strain, you should have the 
children stop watching 3D TV and you should have 
the children rest.
Do not use the 3D Glasses for other purposes such 

• 

as sunglasses or general eyeglasses.
Do not use the 3D mode or wear 3D Glasses while 

• 

you are moving around. Using the 3D mode or 3D 
Glasses while moving may lead to injuries due to 
running into objects, and falling.
Use only the supplied 3D glasses.

• 

If you experience screen 

fl

 ickering when watching 

• 

3D images in poor light conditions, you should turn 
the lamp off or dim the light.
When using headphones, you should adjust the 

• 

volume so as to avoid excessive levels, since 
hearing damage may result.

Caution

Please read these safety instructions carefully to 
ensure your personal safety and to prevent
damage.
If you experience dif

fi

culty while viewing 3D images 

with the 3D glasses, you may have some problems 
with your eyesight.
• You may experience headaches or fatigue when 
viewing 3D images through the glasses for too long.
If you experience headaches, fatigue, or dizziness, 
stop watching immediately.

01_MB69_[GB]_DVB-TC_PVR_GOLD17_5103UK_42947W_10077158_50209400.indd   3

01_MB69_[GB]_DVB-TC_PVR_GOLD17_5103UK_42947W_10077158_50209400.indd   3

29.12.2011   15:39:13

29.12.2011   15:39:13

Summary of Contents for 42F701










































Reviews: