Finlux FL5030FSWK, Owner'S Manual

English

   - 52 -

Connectivity

Wired Connectivity

To Connect to a Wired Network

• 

You must have a modem/router connected to an 

active broadband connection.

• 

Connect your PC to your modem/router. This can 

be a wired or wireless connection. 

• 

Connect your TV to your modem/router via an 

ethernet cable. There is a LAN port at the rear 

(back) of your TV.

Broadband ISP connection

LAN (ethernet) cable

LAN input on the rear  

side of the TV

To configure wired settings please refer to 

the Network/Internet Settings section in the

System>Settings Menu.

• 

You might be able to connect your TV to your LAN 

depending on your network’s configuration. In such 

a case, use an ethernet cable to connect your TV 

directly to the network wall outlet.

LAN input on the rear  

side of the TV

network  

wall socket

Configuring Wired Device Settings

Network Type

The 

Network Type

 can be selected as 

Wired

Device,

Wireless Device 

or 

Disabled

, in accordance with the 

active connection to the TV set. Select this as 

Wired 

Device

 if you are connecting via an ethernet.

Internet Speed Test

Highlight 

Internet Speed Test

 and press the 

OK

 but-

ton. TV will check the internet connection bandwidth 

and display the result when complete. 

Advanced Settings

Highlight 

Advanced

Settings

 and press the 

OK

button. On the next screen you can change the IP 

and DNS settings of the TV. Highlight the desired one 

and press Left or Right button to change the setting 

from 

Automatic

 to 

Manual

. Now you can enter the 

Manual IP

 and / or 

Manual DNS

 values. Select the 

related item in the drop down menu and enter the 

new values using the numeric buttons of the remote. 

Press the 

OK

 button to save settings when complete. 

Wireless Connectivity 

To Connect to a Wireless Network

The TV cannot connect to the networks with a hidden 

SSID. To make your modem’s SSID visible, you should 

change your SSID settings via the modem’s software. 

To Connect to a wireless LAN, you should perform 

the following steps:

• To  configure  your  wireless  settings  please  refer 

to  the 

Network/Internet Settings

 section in the 

System>Settings

Menu

.

Broadband 

ISP 

connection

A Wireless-N router (IEEE 802.11a/b/g/n) with 

simultaneous 2.4 and 5 GHz bands is designed to 

increase bandwidth. These are optimized for smoother 

and  faster  HD  video  streaming,  file  transfers  and 

wireless gaming.

• 

The frequency and channel differ depending on 

the area.

• 

The transmission speed differs depending on the 

distance and number of obstructions between the 

transmission  products,  the  configuration  of  these 

products, the radio wave conditions, the line traffic 

and the products that you use. The transmission may 

also be cut off or may get disconnected depending 

on the radio wave conditions, DECT phones or any 

other WiFi 11b appliances. The standard values of 

the transmission speed are the theoretical maximum 

values for the wireless standards. They are not the 

actual speeds of data transmission.