17
ENG
9.2 Selecting and loading a heating program
1
Press the Right-hand arrow button until the LED under the "Prog." display lights up.
2
Select a program (1 - 9) using the
and
buttons.
9.3 Starting/stopping a heating program
Requirements:
The sintering oven has been fed
The heating program has been loaded
1
Press the Start/Stop button.
The heating program starts.
While the program is running:
The function display shows the oven temperature or the remaining holding time.
The day/time display shows the finishing time of the program.
The respective target temperature can be displayed by pressing the Right-hand arrow button.
The program can be stopped at any time by pressing the Start/Stop button.
Pressing the Start/Stop button again restarts the program from the beginning.
9.3 Removing the sintering dish from the heating oven
Requirements:
The sintering oven has cooled down to 300 °C to enable the oven door to be opened.
1
Guide the tongs under the sintering dish and lift it off the support pins.
2
Place the sintering dish on a suitable heat-resistant surface.