27
ENG
7
Configure the logging:
Select the “Standard” option in the “Logging” menu.
The configuration window is opened.
8
Set the checkmark as shown and give the TXT file a name.
9
Confirm with “OK”.
10
Start the sintering program at the sintering oven.
The sent data is displayed.
The target temperature appears in the left column, the actual temperature in the right column. New
measured values are transferred at minute intervals.
11
Click on the X button to write the data to the known TXT file (here Test1.txt).
12
The logging is terminated by clicking on the button.
