MNL004_EN rev. F
Pag.
6
di
56
1
GENERAL INFORMATION
1.1
CERTIFICATION
All Refrigerated cabinets are built in accordance with the relevant European Directives applicable at the time of its
placing on the market. The Refrigerated cabinets are certified in accordance with Directives 2006/42/EC, 2014/30/EC,
2014/35/EC and subsequent integrations, built according to the safety requirements for electrical appliances for use in
the laboratory (CEI EN 61010-1). In the case of medical devices suitable for the storage of blood or blood products,
equipment is certified in accordance with Directive 93/42/EEC and its integration Directive 2007/47/EC.
1.2
TESTING AND WARRANTY
The machine is tested at our factory in accordance with current regulations and it is shipped ready to use. The warranty
is valid for 12 months from the date of delivery and establishes the right to repair/replace parts that are defective, not
including electrical and electronic parts. Apparent defects and any deviations from orders must be communicated to
the manufacturer within 5 days of receipt of the goods under penalty of invalidation of the warranty. Any other defects
(not apparent) must be communicated within 5 days of discovery, and in any case within the maximum 6 months
warranty period. The customer will only be entitled to the repair or replacement of goods, with the absolute exclusion
of any direct or indirect damages of any kind. In any case, the right to repair or replacement of materials must be
exercised within the maximum time limit provided by the warranty, with the time limits having been contractually
reduced with respect to those established by law. Repair or replacement of defective materials will occur at the
manufacturer's factory, where materials must be delivered with freight prepaid. The manufacturer will then return them
carriage forward.
1.3
PURPOSE, CONTENT AND RECIPIENTS OF THE MANUAL
This manual has been drafted for the purpose of providing all the instructions necessary for correct use of the machine
and for maintaining it in perfect condition, in particular with regard to the user's safety. The following professional
figures shall be defined in order to identify tasks and responsibilities:
Installer:
qualified technician who performs machine placement and commissioning in accordance with the
instructions in this manual.
User:
person who, after carefully reading this manual, uses the machine for his own permitted uses. It is mandatory for
the user to read the manual carefully and make reference to it.
Routine maintenance worker:
qualified technician able to carry out routine maintenance on the machine, following
the instructions in this manual.
Special maintenance worker:
qualified technician authorised by the manufacturer, able to carry out special
maintenance on the machine.
The manufacturer declines any responsibility for improper or unreasonable use of the machine and for all those
operations carried out on the same ignoring the instructions in this manual.
The manual must be kept in an accessible location known to all operators (installers, users, routine and special
maintenance workers).
No part of this manual may be reproduced and/or disclosed by any means and in any form whatsoever.
1.4
ARRANGEMENTS PREPARED BY THE CUSTOMER
The following arrangements are set by the customer:
-
The machine electrical connection, with care of SUPERARTIC models
-
Installation site arrangement
-
Routine maintenance
-
Refrigerator cleaning and the products used for it
Summary of Contents for 130
Page 1: ...Pag 1 di 56 ...
Page 2: ......
Page 55: ...MNL004_EN rev F Pag 55 di 56 ...
Page 56: ...MNL004_EN rev F Pag 56 di 56 MNL004_ITA rev F Via Panagulis 48 ...
