MNL004_EN rev. F
Pag.
43
di
56
MODEL 700-1500
PHASE 1
In models with higher motors (700-1500 L), the condenser can be accessed directly from the outside using a ladder.
PHASE 2
Use a vacuum cleaner, air jet, or a long bristle brush to remove any dust on the condenser fins.
PHASE 3
Restore the electrical current and switch back on the device.
5.4
CONDENSATE WATER DRAINING
Defrosting causes the formation of condensate water. The water evaporates
automatically in models with motor compartment in lower position.
In some other models, water is collected in a tray, included in supply, which is set
under the unit and inserted in the corresponding slides.
This tray must be emptied frequently
Optionally, models with upper motor compartment can have a collecting tray
included for automatic condensation water evaporation.
List of Models with upper motor:
EMOTECA TWIN
700
–
1500
SUPERARTIC
700
–
700 2T
PLASMA SUPERARTIC
700
–
700 2T
LABOR
700 2T
PLASMA LABOR
700 2T
SPARK-PROOF
400
–
700
CONDENSER
Figure 26 - Condenser position in models 700-1500
Figure 27 - Condensate collection tray position
Figure 28 - Tray with automatic condensate water
evaporation
Summary of Contents for 130
Page 1: ...Pag 1 di 56 ...
Page 2: ......
Page 55: ...MNL004_EN rev F Pag 55 di 56 ...
Page 56: ...MNL004_EN rev F Pag 56 di 56 MNL004_ITA rev F Via Panagulis 48 ...
