MNL004_EN rev. F
Pag.
9
di
56
3
PRODUCT DESCRIPTION
3.1
TECHNICAL DESCRIPTION
The refrigerated cabinet covered by this manual produces cold by means of low-pressure vaporisation of a liquid
refrigerant, such as HCFC, HFC, inside a heat exchanger (evaporator). The vapour thus obtained is brought back to
the liquid state by means of a higher pressure mechanical compression (via a compressor) followed by cooling in another
heat exchanger (condenser). The correct, uniform distribution of air inside the cabinet is guaranteed by one or more
fan motors, depending on the model.
The machine is composed of a modular monocoque coated with different materials and insulated with polyurethane
foam at a density of 43 kg/m³.
The instrumentation is grouped on the front panel. On some models, the motor compartment, where the condenser
unit and electrical wiring can be housed, closes automatically.
Inside, the machine is equipped with brackets suitable for supporting wire shelves, extractible drawers and steel baskets.
The doors on all machines are equipped with a closing device with automatic return and door lock and easily replaceable
magnetic seals for perfect tightness. Measures were taken during design and construction to obtain a machine that
meets specific safety requirements, such as internal rounded corners, condensate liquid drainage, no rough surfaces,
fixed guards on moving or potentially dangerous parts, and so on.
The maximum capacity of shelves and drawers load on all Fiocchetti models is 30 kg with weight uniformly distributed.
All models are for indoor use and cannot be installed outdoors. Warranty will immediately expire, if
equipment is installed improperly.
3.2
INTENDED USE
All the listed models are suitable for storage. For this reason, we suggest only storing products that have already been
refrigerated or frozen (depending on the model).
We declare that any use outside of those allowed by the machine is considered as “improper use” and therefore the
manufacturer declines all responsibility.
3.2.1
LABORATORY DEVICES
Laboratory devices are suitable for:
-
Storage of correctly packaged drugs, vaccines, and reagents that are not liquids or body tissues intended for
administration or introduction into the body
-
Storage of other substances or materials for general use in a non-flammable or non-explosive hospital, laboratory
or pharmaceutical environment
-
They are not to be used for the storage of blood, fluids or body tissues.
This category includes series models:
MEDIKA
+2°C +15°C
MEDIKA 2T
+2°C +15°C
LABOR
+2°C +15°C
LABOR 2T
+2°C +15°C / -15°C -24°C
VISION
-10°C -20°C
VISION 2T
+2°C +15°C / -10°C -20°C
FREEZER
-10°C -25°C
SUPERARTIC
-20°C -40°C
SUPERARTIC 2T
+2°C +10°C / -20°C -35°C
TER
+15°C +30°C
SPARK PROOF
+2°C +15°C
Summary of Contents for 130
Page 1: ...Pag 1 di 56 ...
Page 2: ......
Page 55: ...MNL004_EN rev F Pag 55 di 56 ...
Page 56: ...MNL004_EN rev F Pag 56 di 56 MNL004_ITA rev F Via Panagulis 48 ...
