4
E
N
1. Control arm
2. Bonnet
3. Flexible vacuum hose
4. Flashing beacon
5. Vacuum head
6. Waste container
7. Extinguisher
8. Dashboard
9. Air intake filter
10. Rigid vacuum tube
11. Handle
12. Dust suppression water tank
13. Storage compartment
2.2 Identification Plate
The machine is identified by means of a self-
adhesive plate on the bonnet displaying indelible
details related to “CE” marking.
The plate must never be removed and should
always be kept legible. In case of damage, a
duplicate should be ordered. The machine may not
be sold without the plate.
3 Before Putting into Service
3.1 Unloading the machine
DANGER
Risk of injury and damage.
Do not use any forklift device to unload the
machine. Proceed as follows:
• Open the cardboard packaging.
• The machine is fixed to a wooden platform
with
strapping and chocks to immobilise the wheels.
• Cut the straps and remove the chocks. The
machine can then be moved and pushed down
from the platform.
• The machine can be moved in two ways: with or
without the drive mechanism engaged.
DANGER
Risk of injury and damage.
Before releasing the drive mechanism,
hold the appliance firmly so that it cannot
move accidentally.
The knob for the releasing the electric brake is at
the bottom left at the rear of the machine (see
figure below item 1). Pull the knob towards you.
A label with the symbol P has been placed on the
chassis to help you locate the exact position.
5
6
9
10
11
12
1
