MAINTENANCE
ECOMINI
Rev. 000
18/09/2017
32/37
5.3.2 BRUSH MOTOR MAINTENANCE
To ensure scrubbing brush motor perfect efficiency, the motor brush wear should be checked yearly and the
motor brushes should be replaced, if necessary.
Brush motor maintenance should be carried out as follows:
Remove the key from the control panel to prevent unwanted starts (battery-operated version) or
unplug the machine from the mains power outlet (electrically operated version);
Empty the recovery tank to minimise its weight before removing it from the machine;
Remove the motor grid fixing screw (fig. 5.2);
Remove the motor grid to obtain easy access to the motor brushes (fig. 5.2);
To re-assemble all the parts, perform the same operations in reverse order.
5.4 WIRING SYSTEM CHECKS
The machine wiring system should be inspected and examined every 2 years. It is very important to
immediately correct any defects, e.g. disconnected wires or burnt cables.
Any service on the wiring system should be carried out by a skilled technician.
Any maintenance or repair not described as routine maintenance should be carried out by
specialised personnel authorised by FIORENTINI.
FIGURE N. 5.2
