1.4 INTENDED USE AND UNINTENDED USE
The machine referred to in this manual (
MIRA 40
) is an operator-controlled hard floor scrubber-dryer. It must be
used to scrub and vacuum liquids on flat, hard, horizontal, smooth or moderately rough and uniform floors that are
free from obstacles in both civil and industrial environments.
DANGER!
Any other use is strictly prohibited!
Please read the safety information provided in this manual very carefully.
The scrubber-dryer distributes a quantity of a solution consisting of water and detergent (that can be regulated) onto
the surface to be cleaned, while the brushes remove any dirt from the surface.
The machine’s vacuum system, with the aid of the squeegee, completely dries the liquids and removes the dirt
removed by the front brushes in a single pass.
By matching the correct detergent with various types of brush (or abrasive disks), the machine can adapt to all the
various floor-dirt combinations.
1.5 TECHNICAL MODIFICATIONS
This machine was designed and built in accordance with the fundamental requirements for user health and safety
pursuant to the European directives. The CE mark was therefore placed on the rating label.
The European directives to which the appliance is compliant are referred to in the Certificate of Conformity, attached
to this manual. This certificate will cease to be valid if the appliance is modified in any way without the
manufacturer’s prior authorisation.
The manufacturer reserves the right to make technical modifications to the product without prior notice in order to
make technical upgrades or improvements.
For this reason, some details of your machine may be different from the information contained in the sales
catalogues or the illustrations shown in this booklet. Nevertheless, this will not affect safety or invalidate the
information provided regarding it.
1.6 PRODUCT IDENTIFICATION
Make sure that there is a rating label containing the serial number and the CE mark attached to the machine.
If there isn’t, please inform your dealer immediately.
The rating plate contains the following information:
Manufacturer’s identification data
CE mark
model
serial number
total power rating
year of construction
