STARTING AND USE INSTRUCTIONS
ET 65-75
Rev. 000
20/12/04
22/34
Make sure that the detergent is suitable for the dirty surface. FIORENTINI S.r.l. is not
responsible for damages provoked by too aggressive detergents.
4.7.4 RUDDER BAR FUNCTIONING
The rudder bar of this scrubber machine is composed by:
¾
Accelerator lever (see detail nr. 6 in picture nr. 4.9.): by means of the forward/backward lever and the
accelerator lever, the machine moves forwards or backwards.
The accelerator pedal activates all the machine moving parts. This is why the brushes and
the suction motor are activated pressing the accelerator pedal and their switches on the
dashboard. On the contrary, the accelerator pedal can’t activate the solution solenoid valve,
which has to be opened and closed by the operator.
¾
Service/Parking Brake (see detail 3 in picture 4.9). it has to slow and stop the machine. If the operator
wants to set the service brake on, he/she has to press the service brake pedal (. If he /she wants to
release the service brake, he/she has to press both the brake pedal and the release pedal and press
the release knob.
¾
Brushes Plate up/down Pedal (see details 1-2 in picture 4.9):
¾
Pedale per abbassare e alzare il piatto spazzole (particolare 1 / 2 figura4.9). Press pedal nr. 2 to low
the brushes plate or pedal nr. 1 to pull it up;
¾
Solution lever (see detail 4 in picture 4.9). Turn the solution lever until the solution quantity that flows
out is sufficient;
¾
Squeegee up Lever (see detail 5 in picture 4.9). The operator can low or lift the squeegee up turning
this lever. At the same time, the suction engine is activated. Turning this lever to the opposite
direction, the operator can lift the squeegee up and switch the suction engine off.
Picture 4.9
1 2
3
4
5
6