INSTRUCTIONS FOR STARTING AND USE THE MACHINE
I 42/60 GAS
Rev.000
29/01/10
18/34
4.5. INSTALLATION
The autoscrubber ICM38GAS can be started only when you are completely sure that all the components and
devices of the machine are efficient.This is why, well trained FIORENTINI technicians do a strict control while
producing the machine and an accurate final test. Anyway, FIORENTINI suggests to do another test before
starting the machine. Please see the scheme below.
Result
Test
√
X
Hydraulic oil level
Engine oil level
Engine cooling water level
Wheels brake
Pilot lights functioning
If the result of the test is positive, the machine can be started. On the contrary, please contact immediately FIORENTINI
service.
The test above must be periodically done in order to keep the machine always efficient.
The machine must be started by authorized personnel.
4.6. CONTROL DEVICES
4.6.1. DASHBOARD
The dashboard is made of a series of switches that activates or disactivates all the machine functions. The
function of each switch is shown by a picture. Picture 4.6. shows the dashboard of the machine and the
switches function is explained in the scheme of the following page.