INSTRUCTIONS FOR STARTING AND USE THE MACHINE
I 42/60 GAS
Rev.000
29/01/10
21/34
4.7.2 CHOOSING THE RIGHT DETERGENT
Choosing the right detergent is very important for a perfect cleaning. A too strong detergent could damage
the surface. A good quality detrgent has to produce little foam. Alternatevely, the operator can add an
antifoaming additive or 50 cc of wine vinaigre in the recovery tank in order to avoid the suction motor
damage.
Make sure that the detergent is suitable for the dirty surface. FIORENTINI S.r.l. is not
responsible for damages provoked by too aggressive detergents.
4.7.3 DRIVING POSITION REGULATION
By means of the lever (see detail nr. 1 in picture nr. 4.8.) for the steering column regulation, the operator can
pull backward or push onward the steering wheel in order to have a driving position which fits his/her body.
4.7.4 RUDDER BAR FUNCTIONING
The rudder bar of this scrubber machine is composed by:
Accelerator pedal (see detail nr. 3 in picture nr. 4.9.): the machine moves forward by means of the
right pedal and backwards by means of the left pedal.
Service brake (see details nr. 1 and 2 in picture nr. 4.9.): it has to slow and stop the machine. If the
operator wants to set the service brake on, he/she has to press the service brake pedal. If he/she
wants to release the service brake, he/she has to press both the brake pedal and the release pedal
and the release knob (see detail nr. 2 in picture nr. 4.9.).
Accelerator lever (see detail nr. 4 in the picture nr. 4.9.).
PICTURE N. 4.8
1