SAFETY
I115SS
Rev. 001
22/12/2014
12/58
3. SAFETY
3.1. RECOMMENDED USE
This combined floor sweeping-scrubbing-drying machine has been designed and
built for use in industrial environments, to carry out sweeping, wet scrubbing, drying
and effluent collection on flat horizontal surfaces or surfaces with a gradient not
exceeding 10%. The maximum travelling gradient allowing for U-turns at 2 Km/h is
3%.
3.2. MISUSE
machine driving by unauthorised personnel;
scrubbing uneven and/or bumpy surfaces;
scrubbing surfaces inclined along the machine horizontal roll axis;
scrubbing surfaces whose gradient exceeds 10%;
performing U-turns at a speed in excess of 2 km/h with a gradient in excess of
3%;
using the machine in environments containing dangerous substances, and in
particular, in explosive atmospheres or inadequate microclimatic conditions;
cleaning machine surfaces in the presence of flammable substances;
the machine may not be used as a means of transport for people or other
vehicles;
altering or tampering with safety devices;
charging batteries at not sufficiently ventilated locations;
failure to comply with applicable safety standards currently in force;
fitting equipment/devices likely to interfere with machine operation;
introducing changes or alterations not authorised by FIORENTINI;
using acid solutions likely to damage the machine;
failing to comply with use and maintenance manual specifications.
Informative labels provided on the machine should be carefully read and should not
be covered for any reason.
FIORENTINI shall not be liable in any case for any of the
above not recommended uses of the machine (instances of misuse).
3.3. SUGGESTED EQUIPMENT
To make the best use of your machine, equipment specially designed and tested by Fiorentini and original
spare parts should be used. The Design Department of FIORENTINI S.p.A. is willing to meet any design
requirements concerning parts and components for personalised applications.
