MAINTENANCE
I115SS
Rev. 001
22/12/2014
37/58
Centre brush replacement:
To adjust the height of the centre brush, turn the nut on the left side of the frame next to the hydraulic
jack (fig.4.21): turn counter-clockwise to lower the brush and in the opposite direction to lift it.
Side brush replacement:
Lift the waste box to make brush replacement easier;
remove the key from the control panel to prevent unwanted ignition;
remove the three nuts and washers (detail 1, fig. 4.22);
remove the centre screw (detail 2, fig. 4.22);
remove the brush and fit the replacement;
FIGURE 4.20
FIGURE 4.21
1
2
FIGURE 4.22
