13
BRUSHES REPLACEMENT
The operator has to follow the instructions below to replace the brushes (picture 10):
Ø
Take the ignition key away from the dashboard in order to avoid a casual
starting of the machine;
Ø
Right side brush replacement: remove the case by means of the knob (see detail
nr. 1 in picture nr. 10-a) and translate it outside. Translate counterclockwise
the right brush and remove it;
Ø
To set a new brush up: put the coupler pins under the brush support slots, pull
the brush up and translate it (clockwise for the right brush and
counterclockwise for the left one);
Ø
Set again the brushes cases up and fix them by means of the knob.
1.
squeegee height screw
2.
squeegee fastening screw
3.
squeegee inclination screw
1
2
3