Installing Basin
- Mount the motor to the bracket using the large clevis pin and clip.
Connect the 2 wiring harnesses (black and white) to the spa chair, Turn on spa chair
and push and hold the left arrow button to send the push rod forward until it stops.
Push basin under chair and align the push rod assembly to the rear of the basin, attach
using large clevis pin and clip. Run the hot and cold supply lines underneath control
box, and fasten the drain pipe to the threaded drain on the rear of the spa.
Mount the rear of the drain pipe to the drain mounting bracket using the smaller clevis
pin and clip.
If extension cords are required please be sure to use a 12 gauge cord.
Summary of Contents for 8000
Page 6: ...Dimension Diagrams ...
Page 7: ......
