RECOMMENDATION: Purchase Chimfex™ Dry Chemical Chimney Fire Extinguisher. These are readily available at most stove shops
and hardware stores. Smoke detectors should be installed on all levels of your home. Having a fire extinguisher in the furnace room or
area is strongly recommended.
Assembly
of
Unit
Please review the parts list and diagrams contained on pages 15 - 16 of this manual.
DOUBLE CHECK TO MAKE SURE YOU HAVE RECEIVED ALL THE REQUIRED
COMPONENTS. IF YOU FIND THAT THERE IS A PART MISSING, CALL
1-800-875-4788 FOR FASTEST SERVICE, PLEASE DO NOT GO BACK TO THE
DEALER. DEALER DOES NOT CARRY REPLACEMENT PARTS.
NOTE: For your convenience your Fire Chief Furnace has been factory assembled and the electrical control assembly pre-wired.
1. Fasten the right and left side angle brackets to the circulation blower using (4) ¼ - 20 bolts and nuts. Place brackets to
lowest position on housing.
2. Line up the blower with the pre-drilled holes on the backside of the furnace, firmly attach with the screws provided.
4
Mounting Screw
Blower Assembly
Blower Assembly
Mounting Screw
Blower Assembly
Mounting Screw
1/4-20 Bolt
Four Places
1/4-20 Nut
Angle Bracket
1/4 - 20 Nut
1/4 - 20 Bolt
Angle Bracket